Does anyone have both and willing to give honest opinions about both? I'm curious of quality and playability of both and what everyone's thoughts are on thre Chibsons.

Truss rod nut won’t turn. What has your experience been?

This amp looks like a great, budget, practice amp. Picked it up on Friday and will be putting it through its paces for a full review. In the meantime, I posted a "First Look" video. https://youtube.com/shorts/ThVyK5m7yYk?feature=share

New builds. LP special... 60s strat.

Ok,I am usually the guy who rolls his eyes when guitar setup is mentioned, and I usually mention how old my guitars are, and that they have never been set up as far as I know. I finally got curious enough to put a metal a straight edge on the frets (I have an 18" metal ruler that is perfect), my 43 year old Peavey Patriot showed maybe a mm or more of space between the edge and the 9th fret. I adjusted the truss rod and after a bit of tightening, when I spanned the frets, the straight edge was right at the point where the straight edge was just starting to touch the center frets, I checked it out, and the action was kind of like look at the guitar and say A, and it plays A. I decided while I was at it, I would adjust the pickups a little, and now, it's just a rock and roll machine! I played it a couple of days until I couldn't stand the itch any longer, and swapped the Peavey out for my 06 Strat, and ran the same deal on it. I first found that it FELT like the truss rod was getting looser as I turned the Allen nut clockwise, and my measurement seemed to bear that out, so I went with what was working, it seemed like a lot of turning, but eventually I got to the point where it was a fair fit getting an omni guitars business card between the center frets and the straight edge. I tuned it up, and adjusted the pickups a bit, and it is just a delight to play now. There may be room for improvement, but I am in no hurry to play with my bridges or my nuts... no pun intended.