You all heard the old tale about the engineer who charged $10,000 to fix a machine: $1 for turning the right screw and $9,999 for knowing which screw to turn. Well, it’s not just a legend — the engineer was real. His name was Charles Proteus Steinmetz (1865–1923), a brilliant mind in electrical engineering. One day, at Henry Ford’s River Rouge plant, a massive generator broke down. None of Ford’s own engineers could figure out the problem. So, Ford called in Steinmetz. When he arrived, Steinmetz asked for only three things: a notebook, a pencil, and a cot. He spent two days and nights listening to the machine, jotting down calculations. Finally, Steinmetz requested a ladder, a tape measure, and a piece of chalk. He climbed up the generator, took a few measurements, and marked a spot with an X. Turning to Ford’s engineers, he said: "Remove this panel, unwind the coil exactly here, and take out 16 turns of wire." They did — and the generator roared back to life. A few days later, Henry Ford received a bill from Steinmetz: $10,000. Ford, surprised by the amount, asked for an itemized invoice. Steinmetz replied: Marking the spot with chalk: $1 Knowing where to mark: $9,999 Without a second thought, Ford paid the bill. This story was later documented by Jack B. Scott, the son of one of Ford’s employees, in Life magazine in 1965.