Hay gents , looking for the wire diagram for an Audi A8 3.0 L 50 tdi Quattro registration number KEN222 Customer had a tyre blow out and blow the tank and wires to bits I do t have old plug to wire up new one any help would be appreciated, thanks phil .

hi everyone i have a citroen c4 picasso with a c156d, passed over to my workshop from another. we had a fault code for the right rear abs sensor which was a corroded wire which we have repaired and the ABS lights are gone. This is the 2 pin style on the motors and not the older 4 pin ones. Reg : AF67 YGV VIN: VF73ABHZTHJ882074 Fault code: C156D- permanent not clearning i have an xtool d8w only at our garage, when attempting to do electric activation or the parking brake nothing happens, when doing replacement of motor and caliper using the diag nothing happens. Vehicle no longer has parking brake.

Had a Hyundai i20, MOT failure on a brake light on the offside rear. Ignition on, brake on - all brake lights operated. Sidelights on- all sidelights operated. Sidelights on - brake pressed and offside rear light went off. ??? Noticed Offside was dim compared to the others. Bulb is a 2 filament bulb, only the sidelight filament was working for both sidelight and brake. Replaced bulb, only the sidelight filament was working. Must be a fuse!!! Only one fuse for all brake lights. Fuse is blown, Brake lights are working!!!!. Pulled fuse, checked, definitely blown, put back in, no brake lights working. Replaced fuse, checked bulb, both filaments have high resistance. Changed bulb. Tested brake and sidelight also with the sidelights on tested brake. Now both working properly.

Tonight’s session link below,7.30pm please join for another live brain storming session. https://www.skool.com/live/LS599ycHQKP

Help! Anyone assist, front footwell no coms cars stuck on driveway windows down and no coms, all I did was disconnect and reconnect the battery to put the windows back up after stripping down the chain for a camshaft exhaust fault code. Thought best I take off the battery but forgot to put the windows back up. Sent it to a company to be flashed and it’s been returned but it’s still no coms.