Just ordered this to keep on hand when something lands in your clear. This was specifically marketed towards vehicle wrap installers. It has a very fine flexible tip with tiny little barbs all over the sides kinda like a fish hook on steroids. Not a paid endorsement, but I thought it was super cool. Definitely going in my booth cart. https://www.amazon.com/dp/B0FS5PFBM6

Aaron, Wanted to share pics and extend many thanks for your help and advice on all the processes!! Thank you for all you do!! I finished spraying the 65 Mustang on Saturday!! As you may recall, it’s Sherwin William’s “Ford Poppy Red” base and their DC5020 clear. Spraying the clear was tricky with the back to back “wet on wet” coats with no flash time - per the TDS. I’m letting it cure, and will begin the cut and buff process this upcoming weekend. I had some dust that settled on the clear and two small runs (wet on wet clear was tricky to spray - finished a panel and then resprayed the same panel again). Next project is the Mini-Bus in “Hawaiian purple pearl”. Will be diving into it as soon as this one is reassembled. Thanks again!! Talk to you on Saturday!! Bill