This morning we open one of our devices live on camera. 10am PST inside the community. This is the Frequency Charging Station workshop — the field rig that runs Gaia's Pulse (7.83 Hz, the Schumann resonance, Earth's heartbeat) and Aurora's Echo (528 Hz, the repair frequency) side by side to imprint copper, water, jewelry, crystals, and any receptive material that crosses the bench. This one is not a build-along. This is a teardown and a demonstration. I'll open one of the devices on camera, walk through every component piece by piece, and then prove the frequencies are actually being emitted using a frequency counter and an oscilloscope. Real measurements. Real waveform. Live. Most people who own a frequency device have never seen what's inside one. Tomorrow you will. Workshop companion page is now live: 🔗 https://www.thefrequencyacademy.net/free/frequency-charging-station/ Read it before tomorrow if you can — it covers: - The story behind why we built two devices instead of one - The physics of why 7.83 and 528 work together as a pair - The full component breakdown of what's inside each unit - What you can charge with the dual field and how long it takes - The full 9-step workshop flow for tomorrow morning - A prep checklist to get you ready The page also has a tappable checklist that saves your progress — go through it tonight so you walk in tomorrow already in the field. A few notes: This is online only — no in-person option this round. Free for every member. One of the last free workshops before we transition to premium-only access. The door is still open. Watch on the biggest screen you've got. The teardown footage and oscilloscope readouts are detail-heavy. Phones will work, but a laptop is better. If you've been curious about the technology side of the work but felt the build process was too far over your head — this is your on-ramp. Come watch. Come ask questions. No soldering required.

Got it — two separate devices, named Gaia's Pulse (7.83 Hz) and Aurora's Echo (528 Hz). Here's the corrected post: Tomorrow we go deeper into the device side. 10am PT we're going live for a full build workshop on the frequency charging station — the portable field setup that uses two devices working in tandem to imprint frequency information onto copper, jewelry, water, and other receptive materials. The two devices: 🌍 Gaia's Pulse — 7.83 Hz The Schumann resonance. The natural electromagnetic pulse of the Earth itself. The frequency your nervous system was designed to entrain with. ✨ Aurora's Echo — 528 Hz The repair frequency. Studied in cymatics, sound healing, and coherent water work for its effect on geometric structure. Run them together and you have a charging field that holds both Earth-coherence and structural-coherence at once. Tomorrow we open both devices up. We'll cover: - The physics behind why these two frequencies work together - The story behind Gaia's Pulse and Aurora's Echo and why we built them as a pair - The component lists and where to source everything for both builds - The full build from raw parts to finished, working devices - How to charge copper, water, jewelry, food, and other materials with them - Q&A throughout — come with questions This one is online only — no in-person option this round. Just bring yourself, your notebook, and whatever questions you've been sitting with. Free for every member. One of the last free workshops before we transition to premium-only access. The door is still open. A heads up — this pairs beautifully with the tensor ring build from this week. If you built a ring already, bring it. We may end up charging it together at the end of the session. See you tomorrow morning. 🔗 thefrequencyacademy.net