This is a brake warning light, this light is warning with regards to your braking system. 1. This can be a warning for normal brake pads Service and the brake sensor is warn touching due to a warm out pads. 2. This faults can also relate to malfunctioning sensors in the ABS system which can be picked up by diagnostic system 3. This warning can also refers to a faulty electrical handbrake switch, cables or Mechanism such as motors and actuators. DIV

- This is serious at all times , cooling system is a very crucial part of your engine, it’s there to cool and control your engine temperature. When it’s on, it’s a sign of cooling system malfunctioning . What should you do? 1. Make sure when you open your hood you inspect carefully if there is any steam coming out. Danger of Burning injury. 2. Inspect if there is any water leak or dropping on the floor. 3. Check is there is an issue with thermostat or water pump or The drive belt. 4. Check your electronics, for lose plug connections, temperature sensor or coolant radiator fam blower restrictions due to foreign objects. 5. Lastly, check your coolant level and antifreeze concentration. Have a safe ride, Dm if you have any issue that requires assistance with, DIY!

Understanding the basics of a Multimeter Readings and test function is a good way to start your diagnostic DIY, stay tune and subscriber to follow upcoming courses and video tutorials for members only. Share what manufacture do you drive and select below for us to focus on it with more details, Note if you drive you need to know the basics for you to describe your experience and get better results!

If you taking a trip and worried what to check it’s important to check your local service repairs Center if you are uncertain about something, if it’s just basic check out we’ll come out and check, First check if your car has any warning light that you do not understand its meaning! If it’s all clear! 1, When engine is cold and parked at a level ground. - Check your oil level, from your dip stick ( video coming soon) or via a vihecle electronic if it fitted with level sensor - Check your coolant. The engine coolant bottle will be the one with a temperature sign at the bottle cap, so are transparent, check the level only. And top up if necessary - Check your washer fluid water level, that will be the cap with the lid that has a windscreen sign on the cap. Top up we normal tap water, - Check other fluids such as brake fluid, steering fluid of you battery has a magic eye, check it out (video available) 1. Check your tyre pressure with - check this with tyre pressures gauge or at you closes service station: this will save a lot of fuel. - Check your spare wheel or tyre repair kit and lock nut if it’s in the car - Lastly check your basic tools: jack and wheel 🔧 spanner’s This is for the DIY: 👌🏾🚙💼👏🏾

This was once called engine Light, today it’s more complex due to more integration in Automotive electronics, which leads us to the fact of the day! What to do if you see this light on your dashboard? 1. Do not panic if you have obd scanner, starts there, plug in and read the fault codes. 2. Stop and check for any lose plug connections, air pipes clams, leaking oil, fuel or coolant before taking the risk to continue the driving. 3. Inspect and try I hear any funny or uncommonly engine noise, if there is strange noise do not drive! 4. Lastly is review your service history, because service can trigger this light because sensors are not reading as intended. If this has given you a clue keep track for more!