I’ll Be tackling the trans in my legacy 2.5 pretty soon and its the Tr580. Looking for a good Step By step video to do this job. Also, any recommendations on specific transmissions i can use with no other complicated issues to work for my car? Any advice on this would be appreciated!

Which scan diag scanners would yall recommend for your typical everyday DIY’er? Top don, Autel? Etc.. tia.

bought this used with 160k on it a few months ago. Noticed that the Coolant crossover pipe O’rings needed to be replaced since there was some leakage from it. There was oil leaking from both valve covers as well as the Spark plug coils.. I went ahead and replaced the seals for the coil packs, spark plugs, rtv’d with new gaskets both valve covers, replaced plenum gaskets, crossover pipe oring, also when i removed the throttle Body, i replaced that gasket as well. My question is when i took the throttle body off to replace the gasket, Am i supposed to do a factory relearn on that to find the best idle again if that makes since?

Hey guys, new here and were Subaru owners as well. Wife and i have a 13 and 16 year 2.5 legacy and outback. Im mechanically inclined for the most part but keep youtube definitely in my back pocket to Get deeper into things. Looking forward to gathering great info from you guys!