Looking for a little advise on material thickness. I would like to build this display to go on top of my bar cabinet. I will be using 1 in sq tubing mild steel, might order it pickled if not too much more $$$ but struggling with thickness for 2 reasons, weight and cost. This will be a Tig project as my mig will not see this. 😁. Let me know your thoughts on material thickness, tungsten color and size, cup type and size, and amps please. Thank you

Long nights n lots of work

Built a custom catch can for a customer 150 amps on the machine but not using all of it except for the large flange on the bottom. #7 gas lense cup at 25 cfh 3/32 2% lanthanated tungsten 100 HZ AC frequency 30% EP AC balance 3/32 5356 filler rod

Hey everyone. Here’s a roll bar I made for a surprisingly ballsy Hyundai Sonata push 30 psi of boost! Customer is building it for hill climb racing. Let me know what you think!

Glad to have you all here. Please make an introduction post using the “write something” bar at the top of the home page if you haven’t already. Tell us why you joined, what you do, show us some of your work, or ask a question so we can help you whether you’re just starting or just looking for help to improve what you already know. @Tyler Wagner @Tiff Caldwell @Clayton Leyte @Randy Kentzel @Yücel Keleş @David S @Clinton Parker @Cuauhtemoc Gomez @G G