Activity
Mon
Wed
Fri
Sun
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
What is this?
Less
More
11 contributions to AI Automation Society
Hi all,
I introduce myself: Axel Lionel. Italian-Argentinian, based in “the island of gods”. I work with men who have the career and the lifestyle sorted but keep hitting a wall on the personal side. Took me longer than I'd like to admit to figure that one out myself. Good to be here.
0 likes • Jul 29
@Axel Lionel not at all, everything depends on how well you train your Claude Code and how strong is your lead magnet.
1 like • Jul 30
@Axel Lionel Let's hop into the chat
I got tired of re explaining my codebase to Claude every session, so I built a fix
If you use Claude Code for real work, you already know the annoying part. Every time a session resets, Claude forgets everything. You explain your project again. You explain what you already fixed. Again. And it never warns you before it happens, it just cuts you off mid task. I built a free tool called Governor that fixes this. It warns you before a session runs out instead of cutting you off with no notice. It keeps sessions running longer. It writes a handoff before every reset, so Claude picks up where it left off instead of starting from zero. It also stops the small stuff from turning into a whole project. Tiny bugs get fixed on the spot. Only the genuinely risky changes get a full plan first, with exact steps, so you're not sitting through planning ceremony for a typo. No install, no terminal setup. You point Claude Code at it and say one sentence, and it trains itself. It's completely free. I wrote the full breakdown here: Linkedin Post Would love feedback from anyone here running long Claude Code sessions.
0 likes • Jul 30
@Ryan Cunningham Good question, CLAUDE.md handles a different problem. It's static: "these are my project's conventions, here's how I like things done." Claude reads it fresh every session, but it has no idea what actually happened in your last session, what you just fixed, what you tried and ruled out, what you were mid-way through when the context reset. That's the gap Governor closes. Before you hit hourly limit, it writes a handoff of the actual session state, what got done, what got decided and why, what's next and the next session loads it automatically. CLAUDE.md tells Claude the rules of your codebase. Governor tells it what you were just doing. It also does a few other things while it's at it. It stops Claude from re-reading your whole codebase just to fix one small thing, it already knows where everything lives. Small bugs get fixed on the spot instead of turning into a whole planning exercise, only the genuinely risky changes get a real plan first, with exact steps not "I'll add auth" but actual commands, files, and order.
Before you plug a frontier model into your whole workflow, run this $20 test
Everyone wants to rip out their current model the second a stronger one drops. Bad idea if you don't know the cost. The strong models can run 2-5x the tokens of what you're using now. Wire one into your full workflow with no plan and you'll burn thousands before you notice. Here's the test I run instead: Step 1 — pick ONE hard task your team actually struggles with. Not the whole pipeline. One real problem. Step 2 — run it on the new model AND your normal one. Compare the output and the cost, side by side. Step 3 — cap the spend at $20-50. Stop when you hit it. You'll know fast whether it's worth it for your business — without the risk. What model are you testing right now?
1 like • Jul 25
@Ahmad Khan it just depends on the task I give it, sometime sonnet is fine and sometime opus, cost depends on how efficiently I use ai tools. I don't think so any model is value for money, we need to use them in such a way that it is value for money in total.
2 likes • Jul 25
@Mike Donk True. I've noticed Claude Code has been taking quite a bit longer on larger tasks lately. Sometimes I'd rather twice the effort to low of any model in Claude Code if it gets the job done much faster. It's always a trade off between quality, speed, and cost.
I spent a weekend teaching an AI how I think. Now posting takes 5 minutes.
I spent a weekend teaching an AI how I create content. Now creating a post takes about 5 minutes. For months, every post was the same cycle. Write. Delete. Rewrite. Repeat. Then I realized I wasn't creating from scratch. I was rebuilding the same decision-making process every time. So instead of writing better prompts, I documented how I think. I fed it my best posts, the ones I'd never publish, why I approved one and rejected another, who I'm writing for, and what I want each post to achieve. Now I give it an idea. It gives me a solid first draft. I still review everything before it goes live, but the blank page is gone. The biggest lesson? Don't just automate the task. Teach the system how you make decisions. What repetitive process in your work could you teach once instead of rebuilding every time?
1 like • Jul 24
I think the next layer is teaching it how I think, not just how I write. Every post still gets approved or rejected by me. But I also tell it why. If something feels too generic, misses my audience, or isn't something I'd genuinely publish, that feedback goes back into the system. Over time, it's not just learning my writing style—it's learning my standards. I also give it context beyond tone: who I'm writing for, what I want the post to achieve, examples of posts I'd never publish, and the principles behind my decisions. And if it generates something that's outside my usual patterns or isn't confident, it should pause and ask for my input instead of guessing. For me, the goal was never to remove the human. It was to teach the system enough that I only step in where my judgment actually adds the most value.
How I go from design to deployed app now — one thread, zero tool-hopping
Most builders lose the design in translation. Designer makes it pretty. Dev rebuilds it from a screenshot. The final app looks nothing like the mockup. That gap is where projects die. Here's how I close it now. Design to deployed. One thread. Step 1 — Design it. I open the Design tab on claude.ai. I point it at a design.md file — just how I keep my design system in one place. It reads my system and hands back a live, clickable prototype. Not a static mockup. Something you can actually click and tweak. Step 2 — Build it. Claude Design hands the approved design straight to Claude Code. It picks up exactly where the designer left off. No screenshot. No rebuild. No "close enough." Step 3 — Secure it. Before you ship. The step almost everyone skips. Also the one that matters most. New Claude Security plugin (beta). You run /claude-security in the terminal, and it: → maps your whole repo and builds a threat model → scans a PR, a commit, or a branch for vulnerabilities → writes the patch, and an adversarial panel reviews it before it reaches you It catches injection flaws, auth bypasses, and logic errors — the stuff pattern-matching scanners wave straight through. Best part: it runs on the Claude inference you already pay for. No new tool. No new bill. Step 4 — Ship it. Design-system consistent. Security-scanned. Confidence, not hope. The bottleneck was never the building. It was the handoffs. Most teams have three of these four steps covered. Which one are you skipping?
How I go from design to deployed app now — one thread, zero tool-hopping
1 like • Jul 24
@Clinton Sills-Smith Thanks Clinton, means a lot — glad it landed 🙌
2 likes • Jul 24
@Christopher Martin Exactly — the handoff is where the quality quietly leaks out. One source of truth from design through to ship closes most of it. And you're right, same principle scales straight into business systems. Sharp add 💪
1-10 of 11
Samala Vamshi
3
12 points to level up
@samala-vamshi-9419
Helping founders scale with AI, systems, automation, and strategy. Breaking down the systems behind sustainable business growth.

Active 1d ago
Joined Aug 13, 2025
Powered by