This applies to beekeeping in Europe right now. Over the winter, bees die in the hive and some of them end up on the floor or in the entrance. That's normal, but if they pile up they can block the entrance. The colony then can't get out on a mild day for a cleansing flight, and the hive ventilates less well. The B-THENET beekeeping handbook (an EU bee-health project) recommends removing dead bees regularly, both in front of the entrance and from the floor. Snow on the roof is fine, but clear it away from the entrance. Do it gently. A thin stick, a bent wire or a small brush is enough to pull dead bees out of the entrance. Use your hand or a broom for snow. Don't knock on the hive or jolt it, because every disturbance makes the cluster burn more food. While you're down there, look at what you pull out. Swiss bee-health guidance (BGD/apiservice) says that bees with only the head and abdomen left, with the thorax eaten out, point to a shrew in the hive. If you see that, get the animal out and close the entrance down to about 6 mm, or fit 8 mm mesh. In my experience, a handful of dead bees after a cold spell is nothing to worry about. A sudden, much larger pile, or one colony with far more than its neighbours, is worth a closer look on the next mild day. Beekeeping somewhere else? How does your hive entrance look where you are right now?