We have been lucky enough to visit quite a few very interesting and allegedly haunted places in the UK and a few in America, Romania, Germany and Prague and of course Australia. But there are so many more we would still love to go to! Some of the 'allegedly' most haunted places were actually very quiet when we visited. But, that is the reality of ghost hunting. we all know that it does not happen 24/7 and you just have to be at the right place and the right time and we definitely do not provoke. Except when I get cranky that nothing is happening and I kind of what things to move along! But if you would love to jump into this conversation let us know where you would like to go and if you have been somewhere interesting include a photo!

How to properly scan an area for EMF! The biggest mistake people make is walking into a location, switching on a meter, and treating every spike like it’s meaningful. EMF surveying should always happen in layers, not as a single pass. The most effective approach looks like this: You start with a baseline sweep in daylight or before any investigation begins. This means slowly scanning walls, floors, ceilings, and fixed objects to identify normal EMF sources — wiring runs, fuse boxes, light fittings, appliances, phone towers bleeding in through walls, and even underground cables. Most “hauntings” don’t survive this first step. Then you do a static environmental read. You leave the meter stationary in a quiet room for several minutes and watch what it does when nothing is happening. This tells you how jumpy the environment naturally is. Only after that do dynamic sweeps — moving through the space again during the investigation to see if changes are genuinely anomalous compared to your baseline, not just “higher than zero.” And lastly — and this is the part TV never shows — you cross-check readings with multiple meters. One device alone tells you very little. That process matters far more than the brand name on the meter. The EMF devices that actually give the most reliable results - Single-axis EMF meters. These are the old-school, boring-looking handheld meters used by electricians and safety inspectors. They usually measure one direction at a time and give you a clean numerical readout. They’re not flashy — but they’re honest. Excellent for baseline mapping and identifying wiring sources. Terrible for drama.Very good for credibility. Tri-axis EMF meters (including Trifield)These measure EMF in three dimensions at once, which is far more useful in buildings where fields bounce around unpredictably. The Trifield meter sits in this category, but with a twist. It measures: - Magnetic fields - Electric fields - Radio frequency (RF) That makes it genuinely useful — if the operator understands what mode they’re using.