Activity
Mon
Wed
Fri
Sun
Jul
Aug
Sep
Oct
Nov
Dec
Jan
Feb
Mar
Apr
May
What is this?
Less
More
Owned by Justen
Sick of failed 3D prints? Post your issue and I’ll work through it with you step-by-step like 1-on-1 support so you can get it dialed in.
Memberships
Skoolers
185.7k members • Free
6 contributions to Hellcat’s 3D Print Support
20d •
Another printer for the operation.
Added a Bambu Labs H2D to my fleet yesterday. Gonna do a video going over some of the key features and some of the things I like and dislike compared to the other printers I use.
1
0
26d •
Adding SVG’s to your prints
Here’s a quick video on how to add SVG’s to your 3D prints using Tinkercad. If you have any questions or need or further help, Feel free to reach out.
0
0
28d •
BRIM
Hi Justen these are lifting. Do I change the brim to get that little piece of plastic that surrounds the image for adhesion. We’ve added the glue already. Thskny
1 like • 28d
yes add a brim for sure at 5-8mm
Apr 13 •
3D object is sliding all over plate
Hi I was recommended to reach out to you about my design. It gets going and then just lifts and starts sliding. Can you help me please. It’s multiple colors (4). It seems to work well with 1 color. We purchased in December. Thank you
0 likes • Apr 17
Always let the part cool before peeling it off the plate, definitely don’t use a match, that can melt it, warm water and gentle rubbing can help remove the glue, and the brim spot should just peel off
0 likes • Apr 17
You’re very welcome
Apr 15 •
Dry Bones Project Complete
6.5ft tall dry bones, took 4 weeks to make and over 13,000 grams of filament.
1-6 of 6
@justen-larsen-7428
Helping you fix failed prints, dial in slicer settings, and stop wasting filament. Real 1-on-1 style help. No guessing.
Active 4d ago
Joined Apr 10, 2026
Michigan