Hi Nate, try the bolts in the hot end, 6 of them. Then recalibrate. Check both belts tension and then recalibrate too. Have you moved your printer to a new surface that is more unstable than before? Id that's the case maybe adding more weight and eva foam can help

Hi Ken, unless you need the p2s to print some specific material, I would go with a A1 and a enclosure like a tent. I had an X1C, and a A1 both combo. The A1 cost half of it, the ams lite is more reliable and faster, I use a small tent with an exhaust fan to vent the air. That also protects the A1 from dust and warping my prints and humidity. It's easier to do mantainance and many more positive points. The print quility is the same.