Activity
Mon
Wed
Fri
Sun
Nov
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
What is this?
Less
More
3-D Print Hustlers
15
Free
MD
Mother Ducker
135
Free
55 contributions to Mother Ducker
4d •
Premium Members..
Does any one have a 178 mm all gold Danni, gold body gold bow..black eyes printed and ready to ship ? $40 paid Venmo ? I had a box destroyed in shipping and thought I would ask if someone wanted this order before I print it again. Holla back !!!! Thanks
0 likes • 2d
@Darryl Cross its running
0 likes • 2d
@Darryl Cross prime tower detatched at some point overnight. It's still running and looks fine for now, aside from one minor layer shift above the eyes, but I'll let you know how it looks when it finishes the job
Aug 7 •
First Danni and some questions
Printed my first Danni duck today. It mostly went well, had one support fail on the back of the hair. It didn't end up too bad, I had supports from bed only because I didn't want to leave marks on the back. The big problem I had was getting the supports out from behind the ponytail. Does it really need supports there? And if not how do I keep it form putting them there? I finally got them out but it left marks of pink back there. Sorry for so many questions but I'm relatively new to 3D printing.
1 like • Aug 8
@Crissy Dickerson if fully enclosed, your threshold angle should be able to be set to 40-45, if running high speed/open enclosure for PLA cooling benefit, 50-55. *you may need to tweak aux fan profiles as well, but if you punch this into google ai for example, it can walk you through it* another note on support interface, due to the round/curved features of danni, i would suggest changing the interface pattern to concentric to help keep it smoother. your top/bottom z distance: optimum is typically 1.5-2x layer height when using PLA/PLA. if using PLA primary and PETG for interface it goes to 0 for top and bottom. support/object gap .3-.4 i typically don't like enabling independent support layer height, but that's my preference. google search for pro's/con's to make your own opinion. tree branch density may be able to be reduced to 20% to save filament. branch distance to 1.5 can help avoid cosmetic marks. branch angle can safely increase to 45 to help prevent the calculation trying to make supports in mid air/safer lean angle, but you may want to go to 2.5mm on branch diameter to compensate this should help get you going, i recommend punching most of this into google ai to help adjust speed/flow/fan settings
3 likes • Aug 8
@Crissy Dickerson your second picture, where it shows the drop box for support/raft interface. thats where you set the interface material. not sure what slicer you are using, but for bambustudio, once i select it, it auto changes additional settings.
Jul 31 •
A nameplate
open your slicer..import this and see if you can get this onto the chest of your duck. it's kind of a challenge, but see if you can figure it out. THIS is the exact same process you will need to do when you add logos or names.
0 likes • Aug 1
not coming out with the additional lines like your svg
0 likes • Aug 1
standalone keychain yes i can do it like that, but importing that file to the danni duck chest, it doesnt come out as your keychain style. only allowing the base object to wrap
1 like • Jul 29
@Jessica Torres sounds about right, that chin is always a pain. What's your nozzle speed set to for support interface?
1 like • Jul 29
@Darryl Cross which type of tpu are you using as support?
Jul 27 •
Sunday Order !!! Can someone grab it ? This is for a PREMIUM MEMBER approved to sell.
I need a 130mm DANNI-DUCK SILVER BODY, HOT PINK BOW made and shipped . $25. Can anyone grab this order ?
1 like • Jul 28
@Darryl Cross pm me the shipping info, it's in the queue for starting tomorrow morning
1 like • Jul 28
@Darryl Cross 9 hours left on the print, I'll be able to ship it tomorrow
1-10 of 55
Active 16h ago
Joined Apr 15, 2026