🔥 Tip – Door Won’t Latch? Try This First If your door won’t latch and you have to slam it or lift it to close… don’t rush to replace anything. Most of the time it’s a simple alignment issue. 🎥 Watch this video 👇

🚪 Quick Fix: Loose Door Hinge Screw? Here’s a Bush Hack That Works 🔧 Got a hinge screw that just keeps spinning and won’t bite into the door jamb? Don’t rip the whole thing out—here’s a simple trick that works every time. 👉 Grab a small stick (yep, even one from the bush) or any scrap piece of timber. 👉 Whittle it down so it’s slightly thicker than the screw hole. 👉 Tap it firmly into the stripped hole. 👉 Snap or cut it flush with the surface. 👉 Now drive your screw back in. 💥 That screw will bite like new. This works because you’re giving the screw fresh timber to grip into—simple, effective, and no special tools needed. Perfect little MacGyver move for home renos 👊 Got a better hack? Drop it below 👇

Hi Gregg, got any tips of identifying the difference between Dry rot and termites in the wall cavity space ? Appreciated Justin

Tired of digging through your Ute trying to find the right tool? 🔧 Here’s a simple game-changer 👇 I’m installing custom foam inserts into my tool trays and shadowing every tool so everything has its place. Not only does it look clean, but you can instantly see what’s missing and grab what you need without the mess. ✔️ No more wasted time searching ✔️ Keeps your gear protected ✔️ Makes your setup look next level All you need is some high-density foam, a sharp blade, and a bit of patience. Lay your tools out how you want them, trace the shapes, cut them out, and drop everything in snug. Once you do this, you’ll never go back. Follow along—I’ll show you exactly how to do it step by step 💪 #ToolSetup #UteLife #TradieTips #WorkshopOrganisation #iRenov8 ToolControl TradieLi

Who doesn’t love a bit of Demo 🤷‍♂️ Little project in the Shire punching an opening into the garage to access the new office. Watch here for more to come on this little job