I got stuck for a long while on the "Instant setup (magical) module" If your like me on windows and got stuck, your answer might be in here REMEMBER IF YOU GET STUCK JUST ASK CLAUDE If you get stuck at the skills files - Press Windows + R, type "optionalfeatures", hit Enter/OK - Look for Hyper-V in the list and make sure it's checked (including all sub-items) - Click OK and restart when prompted - Try again, if not move to next step 2. Enable virtualization in your BIOS/UEFI This is the most common culprit. Hyper-V won't work if virtualization is disabled at the hardware level: - Restart your PC and enter BIOS (usually by pressing F2, F10, F12, or Del during startup — depends on your motherboard or just look it up if you cant find your key, you can also get into the BIOS through your settings) - Look for a setting called Intel VT-x, Intel Virtualization Technology, or AMD-V or SVM mode (depends on your CPU) - Make sure it's Enabled - Save and exit - Try again 3. Drag the files in to the cowork instead of double clicking Click on all of them "Copy to my skills) then you should be good to go