Activity
Mon
Wed
Fri
Sun
Nov
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
What is this?
Less
More
Memberships
The Fifth Design Studio
78 members • $99
7 contributions to The Fifth Design Studio
Jun 3 •
My attempt without this class
Hi! Before taking this class, I had already tried making a few boards. I had a basic understanding of how to mix resin, but that was about it. Since then, I’ve learned a lot that will help me improve in the future—especially the importance of timing and experimenting more with color pigments. I also noticed that using too much heat burned the white resin and turned it yellow. Another issue I ran into was not leveling the work table. I think once I change these little things my waves will be better.
0 likes • Aug 12
@Olivier Hebert I pored the green on top and used the popsicle stick to smear it down. At the time my boards where not level and I did not let the epoxy set a little before pouring.
1 like • Aug 12
make sure you have a bigger stick around 8 inches. i used a little one like in the picture and was having problems, I ordered larger size from amazon.
Jul 29 •
Help 😣 what am I doing wrong
4 months in and it’s so hit and miss. This was last night attempt
0 likes • Aug 3
how long did you wait after mixing to pour? Is your artwork level?
1 like • Jul 26
This looks really nice. I’ve haven’t even had a chance to try out the new techniques I’ve learned.
0 likes • Jul 26
I like colors
Jun 19 •
TFD is a big inspiration!
Hi everyone! This is one of the boards I've practiced on. Your comments and suggestions are more than welcome!
2 likes • Jun 22
I think practicing on plywood or MDF might be a better option until your technique is dialed in. I really like the transition from dark colors to blue—it’s got a great look! Quick question: did you time your epoxy pour and check the temperature? I picked up a temperature reader myself and will be doing some practice runs soon. Also, are you planning to engrave on this piece? I’d suggest leaving a bit more open space for that. It’ll make the design pop even more.
1-7 of 7
@eduardo-pico-3262
I make custom laser-cut door hangers that add a little charm to your space. I can’t wait to add these custom resin boards.
Active 54d ago
Joined Jun 3, 2025
San Antonio, Texas
Powered by