Believe it or not this table was BLACK when I started. Process: -CLEAN outdoor table of dust, grime, sap, bird droppings etc. -use palm sander to knock down top layer of table and chairs, not completely stripped just a rough up so material will grab, also good opportunity to blend out any chips or wear and tear blemishes -Client requested “warm/ butterscotch tone” to accompany other furniture and pergola across the backyard. - Base coated furniture entirely in Benjamin Moore exterior paint color Sombrero (light golden tan with a touch of olive underone; to accompany foilage) Rolled on smooth and even, brush in nooks and corners - 2 COATS -Took Behr Marquee exterior paint color Ancient Root (dark chocolate diffused brown) ….water paint down… a lot…. Roll out large sections and with a barely damp microfiber rag pull product you rolled on the surface of sections to “stain” the furniture with the paint, finish with a chip brush in long sweeps going with grain to create subtle inconsistency Thx for looking!

This is truly a beautiful house. It’s been a pleasure to watch it be transformed. Sounds like we’ll be doing the exterior next!

-5 showers have been Mastercoated. -electricians have come in and put LED strips in the shower “coves” - we have cement board strips that we siliconed to the wall to cover the light strip. - @Jonathan Pasco is now meshing and concretta over cement board to our existing coat, to get base coat dialed before top finish coats. -we are running a laser and tape line to ensure straight edge ends for end cap of tub/shower. The coves are tedious, but attention to detail is what makes these high end builds a notch higher than the norm. See various videos…

Work in a tight group and keep a wet edge. Base coat for large living room wall. @Jonathan Pasco