Activity
Mon
Wed
Fri
Sun
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
What is this?
Less
More

Owned by Bryan

The I.P. Workshop, getting YOUR prototype working and on the workbench! Propulsion or not... Let's rescue YOUR stalled prototype or project together!

31 contributions to The Lift Society
Can One Person Still Change Everything?
Modern engineering can feel too complex for the lone inventor. Yet individuals still identify problems, create new approaches, and build the first versions of technologies that eventually require entire teams. The Lift Society exists to make sure “one person” doesn't have to mean “one person forever.” With your help, we can surround promising builders with funding, expertise, encouragement, and collaborators. The future may begin in one person's mind, but together we can help carry it farther than one person ever could. The lone inventor may start the story. Community can change how the story ends. Do you think an individual inventor can still trigger a major technological revolution?
Can One Person Still Change Everything?
1 like • 10h
I'd sure like to think so!!!
A Two Ounce Mass Moves Eleven Pounds On The PIE Mini
Bryan StClair is back at the bench, and this week he put the PIE Mini on a digital scale to show exactly what it moves. The rotating mass weighs 1.94 ounces. The engine and plate come to 4.43 pounds. On the heavier carriage it needs to run properly, the whole assembly reads 11.5 pounds, and that two ounce mass is what slings it along. He also found what has been stalling the PIE 7. On the PIE 1 the masses stop dead in well under a quarter turn. On the big rig they coast up to three quarters of a revolution, and he thinks that free coast is what the PIE 7 is missing. His fix is a brake applied mid rotation using the motors themselves, with a relay that shorts the motor leads, smaller timing magnets and a second shielded switch. Two rules came straight off the bench. Less friction is better, and more body mass is better, as long as the motor can start it from a standstill. Nail the brake timing and the same pulse gets cleaner at every scale, which is the whole fight on the way to moving a rider instead of a carriage. That is an envelope anyone with a drill and a scale can test this weekend. Source: StClairtech R&D, https://www.stclairtech.tech Where would you put the brake in a rig like that?
1 like • 2d
The simplest way is to use the motor or gearbox feeding the mechanism. Mechanical brakes tend to be energy wasteful, while regenerative braking will conserve as much as possible when the final designs come out...
1 like • 2d
And Thank you for the "shout out" 🙂
What If It Actually Works?
We spend plenty of time asking why unconventional ideas might fail. Here's the more interesting question: what happens if one works? Who verifies it? Who improves it? Who scales it? Who protects it? Who turns an experimental effect into useful technology? The Lift Society exists not only for the first experiment, but for the possibility of what comes after. With your help, we can build a community capable of recognizing promising results and helping them take their next steps. If something extraordinary happens on one of our builders' benches, we'll already be here. Discovery is the beginning of the engineering problem, not the end. If a member demonstrated a genuinely new propulsion effect tomorrow, what should our first response be?
What If It Actually Works?
1 like • 3d
My 1st reaction would be...
Ion Hovercraft Lifts Nearly Twice Its Weight, No Moving Parts
A four person team just flew the first ion propelled micro hovercraft reported in the open literature. C. Luke Nelson and Grant Nations at the University of Utah Robotics Center, with Mrinmoy Modak and Daniel Drew at the University of Hawaii at Manoa, built a 1.6 gram craft out of three stacked ion stages, 25 micron laser cut brass electrodes and a printed skirt. At roughly 2500 volts it made almost 30 millinewtons, a thrust to weight near 1.8, and 16 millinewtons per watt. It ran 54 takeoffs and landings in ten minutes, hovering one to two millimeters up, carrying about 1.5 grams of payload, and it righted itself against pushes with no control loop and almost no sound. The number to sit with is the skirt. Without it, the same thruster stack picked up only about 8 percent near the ground and could not lift off at all. With a 75 degree skirt trapping its own exhaust against the floor, it picked up about 840 percent. If that scaling holds at larger diameters, ion lift stops being the weakest option on the table. Source: the team's preprint on arXiv, https://arxiv.org/abs/2608.04343 If you were scaling this toward a rider, what would you add first, a bigger skirt or more stages?
1 like • 4d
Bigger everything, and... MORE POWER! Ar, ar, ar...
Are Flying Cars Still Coming?
Flying cars became almost shorthand for technological disappointment. “Where's my flying car?” really means, “What happened to the future we thought we'd have?” Yet personal aviation continues evolving, and the deeper dream isn't necessarily a car with wings. It's radically greater freedom of movement. The Lift Society is interested in that deeper question. With your help, we'll support builders exploring new ways to create lift and propulsion, whether or not the final machine resembles anything Tomorrowland predicted. The future doesn't owe us the exact vehicle from the poster. But together, we can help build something even better. Sometimes a prediction gets the desire right and the machine wrong. Do you actually want a flying car, or is there another form of transportation you'd rather see replace it?
Are Flying Cars Still Coming?
0 likes • 7d
This artwork is courtesy of Thorsteinn Olafsonn of The Inertial Propulsion Workshop🙂
1-10 of 31
Bryan StClair
3
2 points to level up
@bryan-stclair-2604
I help experimenters develop successful prototypes. Primarily, but not limited to, the field of experimental inertial propulsion.

Active 9h ago
Joined Sep 3, 2026
Finger Lakes Region, CNY