Activity
Mon
Wed
Fri
Sun
Oct
Nov
Dec
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
What is this?
Less
More
Memberships
SOLIDWORKS Accelerator
2.2k members β’ Free
9 contributions to SOLIDWORKS Accelerator
Oct '24 β’Β
1.2 Hammer
I am trying to isolate a part on this however this option doesn't come up in the table. I suspect it may be something to do with this. Can someone tell me the difference between these two symbols. I think one means it is fully dimensioned the other I am not sure I have wondered this for a while. The two pictures are attached below.
1 like β’ Oct '24
the central part should be see through, it is on one side however when I rotate it 180 degrees you cant see through the other side. Anyone else experience this ? Is this a glitch ?
1 like β’ Oct '24
Correct me if I am wrong but should this not say 1mm
Oct '24 β’Β
Space Mouse 1.1
I am currently going through the Space Mouse step by step tutorial and have noticed a couple of things.
1 like β’ Oct '24
I am now stuck around this area, I think it should have cut through the slots on the extruded cut. It says something like tangency option right click when I do this the profile looks incomplete. I can't see how to modify/ edit the extruded cut so may have to start all over again.
2 likes β’ Oct '24
Well it was as painful as pushing a boulder up a hill, ( and this is beginner level π) but made it to the end. My graphics card is at the lower end so the appearance isn't high resolution. With the above I extrude cut it in the wrong direction so my issue. And the 0.25 Rad I missed something out but when I did the drawing again from scratch it does work out. Thank you to the person that did this step by step guide I learned a lot from this especially mirroring a plane I wouldn't have thought of doing this. It was really interesting to do this and it covers a lot of ground. I just hope these step by steps get easier π.
Oct '24 β’Β
Mouse Gestures
You don't seem to see this used in many Youtube or Aryan Videos, does anyone use this option much and does it help speed anything up or are there any reasons you like using it ? I just stumbled across it as never knew it existed, but then I looked on Youtube and there was a video of someone using it nine years ago. So its been around for a while, is it just something that never took off for regular users.
2 likes β’ Oct '24
I will have to rewatch some of your videos more closely to see it in action.
Oct '24 β’Β
Middle mouse
Hello, I am getting back to working with Solidworks. Would be very appreciated if someone could tell me how to get view rotate working when you press the middle button on the mouse in to rotate the view. Using Solidworks 2024 and nothing happens when I do this, it makes life quite difficult.
3 likes β’ Oct '24
Mouse is working fine, no faults with the mouse, however thinking about it the mouse is customisable will check the mouse settings when I get home it could be this. Thanks for the input Jesse.
2 likes β’ Oct '24
All good now Avito thank you very much for sorting π
Aug '24 β’Β
π΄Important Update: SA Waiting list!
Hey SA Community! Big changes coming β please read carefully: ππππ«ππ’π§π ππ¨π¦π¨π«π«π¨π°, ππ π°π’π₯π₯ have a waiting list for πππ π¦ππ¦πππ«π¬. - Existing members: You keep your free access! Donβt lose this opportunity! If you're out, then you cannot come back in because you will have to wait in the waiting list. - Why?: 1100+ members in under a month! We just can't keep up with all the demand and the posts! This change helps us maintain quality support by controlling the inflow of people and be able to support to so many of you. - How to be marked Active?: By the end of your 30 days, you must either: Complete 50% of the beginner's course, OR Reach Level 3 in the community. This is your chance to be part of SA for free. Donβt miss out! Questions? Ask below!
1 like β’ Aug '24
I have completed the course and yet it says 0 per cent ? I also unlocked the mini course ( with the Gears ) if the moderators remember I posted a question on here that 2 of the videos were the same repeated twice. The moderator corrected this ! AND YET THIS COURSE HAS NOW BEEN LOCKED TO LEVEL 4, I ALREADY UNLOCKED THIS, this was because it opened after 14 days. ONCE A COURSE HAS BEEN UNLOCKED FOR SOMEONE YOU CANT TAKE IT BACK AND LOCK IT. Very annoyed as have had a summer break as its been too hot to study this and was going to do this course. So basically as it stands I will get kicked out, thanks.
1 like β’ Aug '24
With Regards to the above comment about the mini course and it being unlocked for me as proof I made the comment on July 24 Avito Lourenco said he will get it rectified Ali Younessi said it was fixed Can you please unlock this for me Moderators and correct my 0 per cent score. As much as I enjoy the videos I don't really want to watch the whole lot again!
1-9 of 9
